| Maximum frequency | Vector control:0～600Hz；V/F control:0-3200Hz |
| Control mode | V/F control；Senseless flux vector control(SFVC); Closed loop vector control (CLVC) |
| Carrier frequency | 0.5kHz～16kHz；The carrier frequency can be automatically adjusted based on the load feature |
| Input frequency resolution | Digital setting:0.01Hz；Analog setting: maximum frequency×0.025% |
| Startup torque | G Type:0.5Hz/150%(SFVC)；P Type:0.5Hz/100% |
| Speed range | 1:100(No PG) |
| Speed stability accuracy | ±0.5%(No PG) |
| Torque control accuracy | ±5%(FVC) |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current；P type: 60s for 120% of the rated current, 3s for 150% of the rated current |
| Torque boost | Fixed boost and customized boost 0.1%-30.0% |
| V/F curve | Straight-line V/F curve；Multi-point V/F curve； N-power V/F curve (1.2-power, 1.4-power, 1.6- power,1.8-power, square) |
| V/F separation | Two types: complete separation and half separation |
| Ramp mode | Straight-line ramp；S-curve ramp
Four groups of acceleration/deceleration time with the range of 0.00-6500.0s |
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency
Braking time: 0.0-100.0s; Braking action current value: 0.0%–100.0% |
| JOG control | Jog frequency range:0.00Hz~50.00Hz.
Jog acceleration/deceleration time0.0s~6500.0s |
| Onboard multiple preset speeds | It implements up to 16 speeds via the simple PLC function or by input terminal state |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Input terminals | 5 digital input terminals, one of which supports up to 100 kHz high-speed pulse input; 1 analog input terminal, supports 0-10V voltage input or 4–20 mA current input. |
| Output terminals | 1 digital output terminal;1 relay output terminal
1 analog output terminal : that supports 0–20 mA current output or 0–10 V voltage output |
| Protection mode | Motor short-circuit detection at power-on, input output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. |
| Running command channel | Given by the panel, control terminals, Serial communication port, can be switched by many ways |
| Frequency source | 10 kinds of frequency source, given by digital analog voltage, analog current, pulse, serial port. can be switched by many ways |
